Struct zng::fs_watcher::WriteFile

pub struct WriteFile { /* private fields */ }

Represents an open write file provided by WATCHER.sync.

This type actually writes to a temporary file and rename it over the actual file on commit only. The dereferenced fs::File is the temporary file, not the actual one.

Transaction

To minimize the risk of file corruption exclusive locks are used, both the target file and the temp file are locked. An empty lock file is also used to cover the moment when both files are unlocked for the rename operation and the moment the temp file is acquired.

The temp file is the actual file path with file extension replaced with {path/.file-name.ext}.{GUID}-{n}.tmp, the n is a number from 0 to 999, if a temp file exists unlocked it will be reused.

The lock file is {path/.file-name.ext}.{GUID}-lock.tmp. Note that this lock file only helps for apps that use WriteFile, but even without it the risk is minimal as the slow write operations are already flushed when it is time to commit.

Implementations

impl WriteFile

pub fn open(path: PathBuf) -> Result<WriteFile, Error>

Open or create the file.

pub fn write_text(&mut self, txt: &str) -> Result<(), Error>

Write the text string.

pub fn write_json<O>(&mut self, value: &O, pretty: bool) -> Result<(), Error>

where O: Serialize,

Serialize and write.

If pretty is true the JSON is formatted for human reading.

pub fn write_toml<O>(&mut self, value: &O, pretty: bool) -> Result<(), Error>

where O: Serialize,

Serialize and write.

If pretty is true the TOML is formatted for human reading.

pub fn write_ron<O>(&mut self, value: &O, pretty: bool) -> Result<(), Error>

where O: Serialize,

Serialize and write.

If pretty is true the RON if formatted for human reading using the default pretty config.

pub fn write_yaml<O>(&mut self, value: &O) -> Result<(), Error>

where O: Serialize,

Serialize and write.

pub fn commit(self) -> Result<(), Error>

Commit write, flush and replace the actual file with the new one.

pub fn cancel(self)

Cancel write, the file will not be updated.

Methods from Deref<Target = File>

pub fn sync_all(&self) -> Result<(), Error>

Attempts to sync all OS-internal file content and metadata to disk.

This function will attempt to ensure that all in-memory data reaches the filesystem before returning.

This can be used to handle errors that would otherwise only be caught when the File is closed, as dropping a File will ignore all errors. Note, however, that sync_all is generally more expensive than closing a file by dropping it, because the latter is not required to block until the data has been written to the filesystem.

If synchronizing the metadata is not required, use sync_data instead.

Examples

use std::fs::File;
use std::io::prelude::*;

fn main() -> std::io::Result<()> {
    let mut f = File::create("foo.txt")?;
    f.write_all(b"Hello, world!")?;

    f.sync_all()?;
    Ok(())
}

pub fn sync_data(&self) -> Result<(), Error>

This function is similar to sync_all, except that it might not synchronize file metadata to the filesystem.

This is intended for use cases that must synchronize content, but don’t need the metadata on disk. The goal of this method is to reduce disk operations.

Note that some platforms may simply implement this in terms of sync_all.

Examples

use std::fs::File;
use std::io::prelude::*;

fn main() -> std::io::Result<()> {
    let mut f = File::create("foo.txt")?;
    f.write_all(b"Hello, world!")?;

    f.sync_data()?;
    Ok(())
}

pub fn set_len(&self, size: u64) -> Result<(), Error>

Truncates or extends the underlying file, updating the size of this file to become size.

If the size is less than the current file’s size, then the file will be shrunk. If it is greater than the current file’s size, then the file will be extended to size and have all of the intermediate data filled in with 0s.

The file’s cursor isn’t changed. In particular, if the cursor was at the end and the file is shrunk using this operation, the cursor will now be past the end.

Errors

This function will return an error if the file is not opened for writing. Also, std::io::ErrorKind::InvalidInput will be returned if the desired length would cause an overflow due to the implementation specifics.

Examples

use std::fs::File;

fn main() -> std::io::Result<()> {
    let mut f = File::create("foo.txt")?;
    f.set_len(10)?;
    Ok(())
}

Note that this method alters the content of the underlying file, even though it takes &self rather than &mut self.

pub fn metadata(&self) -> Result<Metadata, Error>

Queries metadata about the underlying file.

Examples

use std::fs::File;

fn main() -> std::io::Result<()> {
    let mut f = File::open("foo.txt")?;
    let metadata = f.metadata()?;
    Ok(())
}

pub fn try_clone(&self) -> Result<File, Error>

Creates a new File instance that shares the same underlying file handle as the existing File instance. Reads, writes, and seeks will affect both File instances simultaneously.

Examples

Creates two handles for a file named foo.txt:

use std::fs::File;

fn main() -> std::io::Result<()> {
    let mut file = File::open("foo.txt")?;
    let file_copy = file.try_clone()?;
    Ok(())
}

Assuming there’s a file named foo.txt with contents abcdef\n, create two handles, seek one of them, and read the remaining bytes from the other handle:

use std::fs::File;
use std::io::SeekFrom;
use std::io::prelude::*;

fn main() -> std::io::Result<()> {
    let mut file = File::open("foo.txt")?;
    let mut file_copy = file.try_clone()?;

    file.seek(SeekFrom::Start(3))?;

    let mut contents = vec![];
    file_copy.read_to_end(&mut contents)?;
    assert_eq!(contents, b"def\n");
    Ok(())
}

pub fn set_permissions(&self, perm: Permissions) -> Result<(), Error>

Changes the permissions on the underlying file.

Platform-specific behavior

This function currently corresponds to the fchmod function on Unix and the SetFileInformationByHandle function on Windows. Note that, this may change in the future.

Errors

This function will return an error if the user lacks permission change attributes on the underlying file. It may also return an error in other os-specific unspecified cases.

Examples

fn main() -> std::io::Result<()> {
    use std::fs::File;

    let file = File::open("foo.txt")?;
    let mut perms = file.metadata()?.permissions();
    perms.set_readonly(true);
    file.set_permissions(perms)?;
    Ok(())
}

Note that this method alters the permissions of the underlying file, even though it takes &self rather than &mut self.

pub fn set_times(&self, times: FileTimes) -> Result<(), Error>

Changes the timestamps of the underlying file.

Platform-specific behavior

This function currently corresponds to the futimens function on Unix (falling back to futimes on macOS before 10.13) and the SetFileTime function on Windows. Note that this may change in the future.

Errors

This function will return an error if the user lacks permission to change timestamps on the underlying file. It may also return an error in other os-specific unspecified cases.

This function may return an error if the operating system lacks support to change one or more of the timestamps set in the FileTimes structure.

Examples

fn main() -> std::io::Result<()> {
    use std::fs::{self, File, FileTimes};

    let src = fs::metadata("src")?;
    let dest = File::options().write(true).open("dest")?;
    let times = FileTimes::new()
        .set_accessed(src.accessed()?)
        .set_modified(src.modified()?);
    dest.set_times(times)?;
    Ok(())
}

pub fn set_modified(&self, time: SystemTime) -> Result<(), Error>

Changes the modification time of the underlying file.

This is an alias for set_times(FileTimes::new().set_modified(time)).

Trait Implementations

impl Deref for WriteFile

type Target = File

The resulting type after dereferencing.

fn deref(&self) -> &<WriteFile as Deref>::Target

Dereferences the value.

impl DerefMut for WriteFile

fn deref_mut(&mut self) -> &mut <WriteFile as Deref>::Target

Mutably dereferences the value.

impl Drop for WriteFile

fn drop(&mut self)

Executes the destructor for this type.