Type Alias Translation3D

pub type Translation3D<T> = Translation3D<T, UnknownUnit, UnknownUnit>;

Aliased Type

struct Translation3D<T> {
    pub x: T,
    pub y: T,
    pub z: T,
}

Fields

x: T

y: T

z: T

Implementations

impl<T, Src, Dst> Translation3D<T, Src, Dst>

pub const fn new(x: T, y: T, z: T) -> Translation3D<T, Src, Dst>

pub fn splat(v: T) -> Translation3D<T, Src, Dst>

where T: Clone,

pub fn identity() -> Translation3D<T, Src, Dst>

where T: Zero,

Creates no-op translation (x, y and z is zero()).

pub fn is_identity(&self) -> bool

where T: Zero + PartialEq,

Check if translation does nothing (x, y and z is zero()).

use euclid::default::Translation3D;

assert_eq!(Translation3D::<f32>::identity().is_identity(), true);
assert_eq!(Translation3D::new(0, 0, 0).is_identity(), true);
assert_eq!(Translation3D::new(1, 0, 0).is_identity(), false);
assert_eq!(Translation3D::new(0, 1, 0).is_identity(), false);
assert_eq!(Translation3D::new(0, 0, 1).is_identity(), false);

pub fn transform_size(self, s: Size2D<T, Src>) -> Size2D<T, Dst>

No-op, just cast the unit.

impl<T, Src, Dst> Translation3D<T, Src, Dst>

where T: Copy,

pub fn to_vector(&self) -> Vector3D<T, Src>

Cast into a 3D vector.

pub fn to_array(&self) -> [T; 3]

Cast into an array with x, y and z.

pub fn to_tuple(&self) -> (T, T, T)

Cast into a tuple with x, y and z.

pub fn to_untyped(&self) -> Translation3D<T, UnknownUnit, UnknownUnit>

Drop the units, preserving only the numeric value.

pub fn from_untyped( t: &Translation3D<T, UnknownUnit, UnknownUnit>, ) -> Translation3D<T, Src, Dst>

Tag a unitless value with units.

pub fn to_transform(&self) -> Transform3D<T, Src, Dst>

where T: Zero + One,

Returns the matrix representation of this translation.

pub fn transform_point3d( &self, p: &Point3D<T, Src>, ) -> Point3D<<T as Add>::Output, Dst>

where T: Add,

Translate a point and cast its unit.

pub fn transform_point2d( &self, p: &Point2D<T, Src>, ) -> Point2D<<T as Add>::Output, Dst>

where T: Add,

Translate a point and cast its unit.

pub fn transform_box2d( &self, b: &Box2D<T, Src>, ) -> Box2D<<T as Add>::Output, Dst>

where T: Add,

Translate a 2D box and cast its unit.

pub fn transform_box3d( &self, b: &Box3D<T, Src>, ) -> Box3D<<T as Add>::Output, Dst>

where T: Add,

Translate a 3D box and cast its unit.

pub fn transform_rect(&self, r: &Rect<T, Src>) -> Rect<T, Dst>

where T: Add<Output = T>,

Translate a rectangle and cast its unit.

pub fn inverse(&self) -> Translation3D<<T as Neg>::Output, Dst, Src>

where T: Neg,

Return the inverse transformation.

impl<T, Src, Dst> Translation3D<T, Src, Dst>

where T: NumCast + Copy,

pub fn cast<NewT>(self) -> Translation3D<NewT, Src, Dst>

where NewT: NumCast,

Cast from one numeric representation to another, preserving the units.

When casting from floating vector to integer coordinates, the decimals are truncated as one would expect from a simple cast, but this behavior does not always make sense geometrically. Consider using round(), ceil() or floor() before casting.

pub fn try_cast<NewT>(self) -> Option<Translation3D<NewT, Src, Dst>>

where NewT: NumCast,

Fallible cast from one numeric representation to another, preserving the units.

When casting from floating vector to integer coordinates, the decimals are truncated as one would expect from a simple cast, but this behavior does not always make sense geometrically. Consider using round(), ceil() or floor() before casting.

pub fn to_f32(self) -> Translation3D<f32, Src, Dst>

Cast into an f32 vector.

pub fn to_f64(self) -> Translation3D<f64, Src, Dst>

Cast into an f64 vector.

pub fn to_usize(self) -> Translation3D<usize, Src, Dst>

Cast into an usize vector, truncating decimals if any.

When casting from floating vector vectors, it is worth considering whether to round(), ceil() or floor() before the cast in order to obtain the desired conversion behavior.

pub fn to_u32(self) -> Translation3D<u32, Src, Dst>

Cast into an u32 vector, truncating decimals if any.

When casting from floating vector vectors, it is worth considering whether to round(), ceil() or floor() before the cast in order to obtain the desired conversion behavior.

pub fn to_i32(self) -> Translation3D<i32, Src, Dst>

Cast into an i32 vector, truncating decimals if any.

When casting from floating vector vectors, it is worth considering whether to round(), ceil() or floor() before the cast in order to obtain the desired conversion behavior.

pub fn to_i64(self) -> Translation3D<i64, Src, Dst>

Cast into an i64 vector, truncating decimals if any.

When casting from floating vector vectors, it is worth considering whether to round(), ceil() or floor() before the cast in order to obtain the desired conversion behavior.

Trait Implementations

impl<T, Src, Dst1, Dst2> Add<Translation3D<T, Dst1, Dst2>> for Translation3D<T, Src, Dst1>

where T: Add,

type Output = Translation3D<<T as Add>::Output, Src, Dst2>

The resulting type after applying the + operator.

fn add( self, other: Translation3D<T, Dst1, Dst2>, ) -> <Translation3D<T, Src, Dst1> as Add<Translation3D<T, Dst1, Dst2>>>::Output

Performs the + operation.

impl<T, Src, Dst> AddAssign<Translation3D<T, Dst, Dst>> for Translation3D<T, Src, Dst>

where T: AddAssign,

fn add_assign(&mut self, other: Translation3D<T, Dst, Dst>)

Performs the += operation.

impl<T, Src, Dst> Clone for Translation3D<T, Src, Dst>

where T: Clone,

fn clone(&self) -> Translation3D<T, Src, Dst>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T, Src, Dst> Debug for Translation3D<T, Src, Dst>

where T: Debug,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T, Src, Dst> Default for Translation3D<T, Src, Dst>

where T: Zero,

fn default() -> Translation3D<T, Src, Dst>

Returns the “default value” for a type.

impl<'de, T, Src, Dst> Deserialize<'de> for Translation3D<T, Src, Dst>

where T: Deserialize<'de>,

fn deserialize<D>( deserializer: D, ) -> Result<Translation3D<T, Src, Dst>, <D as Deserializer<'de>>::Error>

where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl<T, Src, Dst> From<Vector3D<T, Src>> for Translation3D<T, Src, Dst>

fn from(v: Vector3D<T, Src>) -> Translation3D<T, Src, Dst>

Converts to this type from the input type.

impl<T, Src, Dst> Hash for Translation3D<T, Src, Dst>

where T: Hash,

fn hash<H>(&self, h: &mut H)

where H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<T, Src, Dst> PartialEq for Translation3D<T, Src, Dst>

where T: PartialEq,

fn eq(&self, other: &Translation3D<T, Src, Dst>) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T, Src, Dst> Serialize for Translation3D<T, Src, Dst>

where T: Serialize,

fn serialize<S>( &self, serializer: S, ) -> Result<<S as Serializer>::Ok, <S as Serializer>::Error>

where S: Serializer,

Serialize this value into the given Serde serializer.

impl<T, Src, Dst1, Dst2> Sub<Translation3D<T, Dst1, Dst2>> for Translation3D<T, Src, Dst2>

where T: Sub,

type Output = Translation3D<<T as Sub>::Output, Src, Dst1>

The resulting type after applying the - operator.

fn sub( self, other: Translation3D<T, Dst1, Dst2>, ) -> <Translation3D<T, Src, Dst2> as Sub<Translation3D<T, Dst1, Dst2>>>::Output

Performs the - operation.

impl<T, Src, Dst> SubAssign<Translation3D<T, Dst, Dst>> for Translation3D<T, Src, Dst>

where T: SubAssign,

fn sub_assign(&mut self, other: Translation3D<T, Dst, Dst>)

Performs the -= operation.

impl<T, Src, Dst> Zeroable for Translation3D<T, Src, Dst>

where T: Zeroable,

fn zeroed() -> Self

Calls zeroed.

impl<T, Src, Dst> Copy for Translation3D<T, Src, Dst>

where T: Copy,

impl<T, Src, Dst> Eq for Translation3D<T, Src, Dst>

where T: Eq,

impl<T, Src, Dst> Pod for Translation3D<T, Src, Dst>

where T: Pod, Src: 'static, Dst: 'static,